An optional set of additional components to extend the range of experimentation of the TE16 Stiffness of Materials and Structures Apparatus.
Basic Elastic Properties
-
Item Number:TE16A - Experiment -
Item Number:SM1000G - ExperimentTest leaf Spring, knife edges and attachments to allow leaf spring and beam bending tests with TecQuipment's SM1000 Universal Test Machine.
-
Item Number:SM1000E - ExperimentBrinell indenter and magnifier with Graticule. Allows hardness tests to be completed on TecQuipment's SM1000 Universal Test Machine.
-
Item Number:SM1000F - ExperimentTest Coil Spring and attachments to allow tests to prove Hookes' Law and other spring properties using TecQuipment's SM1000 Universal Test machine.
-
Item Number:SM110 - ExperimentTests extension springs to find their properties. Proves Hooke's law and the basic rules of spring design.
-
Item Number:MF40 MKII - ExperimentA small bench-mounting hydraulic tensile testing machine/hardness tester with electronic digital readouts and digital data capture.
-
Item Number:TE16 - ExperimentA bench mounting 3-point bend apparatus to allow investigations into the stiffness in bending of different materials of the same cross-section (Young's Modulus - Stiffness) and the stiffness of a single material with different cross-section geometries (Second Moment of Area - 'I' Value).
-
Item Number:TE16B - ExperimentAn additional set of components and specimens for the TE16 to allow elastic torsion tests to be done.
