Open-circuit, bench top subsonic wind tunnel for a wide range of investigations into aerodynamics. Included with the Wind Tunnel are 3 sets of different models and the Basic Lift and Drag Balance.
Subsonic Wind Tunnels
-
Item Number:AF1125 - Top Wind Tunnel
-
Item Number:AF1300R - Experiment
TecQuipment’s Subsonic Wind Tunnel (AF1300) is an aerofoil suspended on springs within a frame, used to demonstrate wing flutter. The suspension positions of the wing can be altered, as can the angle of attack.
-
Item Number:AF10 - Base Unit
A fully mobile bench to provide basic airflow facilities to enable a wide range of practical airflow investigations. Suitable for demonstration, laboratory and project work at a basic level.
-
Item Number:AF1300 - Base Unit
A compact, practical open-circuit suction wind tunnel for studying aerodynamics. The wind tunnel saves time and money compared with full-scale wind tunnels or airborne laboratories, and it offers a wide variety of experiments.
-
Item Number:AF1300S - Package
The complete starter set includes TecQuipment’s Subsonic Wind Tunnel (AF1300), the Basic Lift and Drag Balance (AF1300Z) and the Three-dimensional Drag Models (AF1300J) - all parts needed for experiments in aerodynamic drag.
-
Item Number:AF1450S - Package
An open circuit suction subsonic wind tunnel with a working section of 450 mm by 450 mm and 1000 mm long. Package includes the Aerofoil with Tappings, a Three-Component Balance, two Differential Pressure Transducers, a 32-Way Pressure Display Unit and data acquisition (VDAS-F).
-
Item Number:AF1600S - Package
TecQuipment's Subsonic Wind Tunnel 600MM (AF1600S) is an open circuit suction subsonic wind tunnel with a working section of 600 mm by 600 mm and 1250 mm long. The package includes a Three-Component Balance, Dual Axis Pressure Traverse, and associated instrumentation such as a 32-Way Pressure Display Unit and Versatile Data Acquisition System (VDAS-F).